Volumetric Concrete Mixers for Sale

We have many years of unique experience and expertise providing a quality service across all aspects of refurbishing, customising and selling volumetric concrete mixers.

2013 Renault Kerax with Cemen Tech 8m150 mixer

2013 Renault Kerax 8x4 with hub reductions, manual gearbox, only 150k miles from new, VSO until 2025 MOT until July 2020 and mix and move capabilities. The mixer is a 2013 Cemen Tech 8m150 with excellent 24″ conveyor, fully refurbished 12″ auger, 360 degree swivel chute and 2x extension chutes, 3x admixture systems, Accuprinter, 4 way camera system, cyclist warning/awareness system. As with all Accumix owned vehicles, this one has been maintained regardless of cost to keep it at the highest standard. This machine is ready to work and would be a great asset to any company, viewings are welcome.

£95,000 +VAT

Please call: 01452 302050

2018/68 Volvo FM with Proall Commander mixer

2018/68 Volvo FM 8x4 Tridem with hub reductions and rear steer, air suspension, 12 months MOT, VSO until 2028 to run at 38.4T, very low miles and hardly used mounted with Proall Commander unit, PTO drive, easy sheet, 2x admixture systems, hydraulic first chute with extension chutes, as new 24″ conveyor and 9″ auger, remote control, rear access platform. This machine is as new and ready to work.


Please call: 01452 302050

Fully refurbished 12″ Cemen Tech/ Armcon 12″ auger assembly

This complete auger assembly has been stripped and refurbished as follows;

  • Shot blast and repsray in RAL7016
  • Complete new auger
  • New maxlife lower auger bearing
  • New top auger bearing
  • New auger mounting plates top to bottom
  • All new rubbers
  • It has been altered to cater for both types of hoist assembly

Can be supplied with the following at extra cost;

  • 360 degree swivel chute assembly
  • Chain slung first chute
  • Drive motor and pipe work
  • Hanger brackets

Give “The Mixer Fixer” a call to see what other refurbished products we can help you with!


Please call: 01452 302050

Upgraded Bay-Lynx lower auger bearing assembly

As we strive to create better products for the end user, we have now released our replacement Bay-Lynx lower auger bearing seal assembly. We have designed our own seal system to vastly improve on the OEM units that are fitted as standard. Our unit is comprised of a steel housing and inner bush with metal face seals which are lubricated through a single grease point. The grease gallery has been designed to not only act as a lubricant, but to also limit material ingress in the first place. As with all of our own design products, we of course have had it out on trial for the last 12 months making sure it does exactly what we set out to achieve before we release it to the end user. The pictures show the seal housing fitted with the upgraded double taper roller bearing which far exceeds the OEM standard ball bearing type. It can be supplied as a conversion kit complete with seal housing, heavy duty bearing and shaft or as just the seal housing which is also designed to work with the OEM bearing.

Give “The Mixer Fixer” a call to see what other Bay-Lynx products we can help you with!

Price from £240.98+vat

Please call: 01452 302050

Trailer mounted Reimer R12

Trailer mounted Reimer R12 with increased agg bin to reach almost 12 metres, this machine has undergone extensive work before mounted to the tri axle trailer which includes, new 24″ conveyor system and rubbers, new 9″ auger and all auger rubbers, all new work lights and beacons, full shot blast and respray, new agg bin sides, lots of new hydraulic pipes, new hydraulic oil, 3x chutes, hydraulic first chute, twin 2300L water tanks, Hatz power pack 2x full length aluminium chequer plate shelves, remote control with over ride switches. This mixer would make an excellent addition to any fleet whether it is as a static unit or for larger loads.

£60,000 +VAT

Please call: 01452 302050

2007 Scania P380 mounted with Cemen Tech 10m150

2007 Scania 8x4 manual gearbox, low miles for the year, long MOT. Mounted with Cemen Tech 10metre machine which includes; 24″ conveyor, 12″ auger, Hatz power pack, 1990L water tank, 360 swivel chute plus 2x extension chutes, 2x admixture systems, very recent full respray. In short this vehicle is in very good condition and is ready to work. The machine can be seen working.

£29,995 +VAT

Please call: 01452 302050

Fully refurbished Cemen Tech 8mx150

In build at the moment we have a Cemen Tech 8m150 mixer body. This machine is being fully refurbished from the ground up to our usual high standards including, but not limited to;

  • Complete new agg bin
  • Complete new hydraulic system
  • Complete new conveyor system
  • Complete new auger and components
  • Complete new electrical and pneumatic system
  • Finished in your colour scheme

In short this mixer will be as good as new when the project is finished ready to mount to a chassis of your choice, or why not exchange your body with us? We can remove your existing body and fit this mixer keeping down time to a minimum and giving you an excellent machine!


Please call: 01452 302050

2000 Scania T Cab with Cemen Tech 6m unit “The Bully”

2000 Scania T cab 6x4 manual with heavily refurbished Cemen Tech 6m150 unit. As I am sure you have seen on our website or social media feed we took this vehicle in and carried out a major refurbishment of it. It started life as a Cemen Tech 6m150 unit, we redesigned the agg bin to eliminate the bridging problems, replaced the entire hydraulic system to work with the Reimer remote control system, fitted nearly 70 lights to it, replaced all of the components on it and so much more its hard to list in this advert! To keep it short, this machine was one of our proudest refurbishments with no expense spared, now its looking for a new home as the current owner is diversifying his business. For a full spec list please contact us and we will be only too happy to help. This is one very eye catching truck that is ready to work.


Please call: 01452 302050

2012/12 Renault Kerax with Bay-Lynx 10m mixer

2012/12 Renault Kerax 8x4, hub reductions, automatic gearbox, VSO to 2024, long MOT only 260k km’s from new. Bay-Lynx 10m mixer, new 24″ conveyor, recently re-bladed 12″ auger, admix systems, 360 degree swivel chute with 2x extension chutes, recent Hawk computer. Vehicle is in use daily and viewings are welcome.


Please call: 01452 302050


2010/10  Mercedes Axor with Reimer R12 unit

2010/10 Mercedes Axor 8x4, low mileage with Reimer R12 unit, good 24″ belt, good 12″ auger, new hydraulic pumps fitted very recently, 2x admix systems, PTO drive, hydraulic first chute with 3x extension chutes, 12 months MOT, VSO untill 2022

£45,000 +vat

Please call: 01452 302050

2008/08 Scania with Cementech 10m unit **REDUCED**

2008 Scania 8x4 with low km’s, MOT till July 2018 with Cementech 10m150. Hatz donkey engine drive, 2x admix systems, 2x extension chutes with 360 degree first chute, Accuprinter, rear work platform, 24″ belt 1 year old, 12″ auger with spare auger to be sold with truck. Ready to work.

£23,000+vat ovno

Please call: 01452 302050

Our product brands


4 + 6 =


01452 302 050




Unit 9a Mill Place One
90 Bristol Road